The working principle of a die-cutting machine is similar to that of a punch, with its vibration source coming from vertical impact motion and a frequency of about tens to 200 beats per minute. The stamping pressure is generally only a few T. Generally, the vibration is not very obvious when placed at the bottom layer; But if the die-cutting machine is placed on a high-rise building, the vibration and noise generated by it can affect the floor and the upper and lower floors, causing significant interference to employees' work and rest. In severe cases, it can also pose great harm to the building structure and should be taken seriously. Our air cushion shock absorber is a mature product developed specifically for stamping equipment, which has been put into the market for 20 years. It has excellent isolation effect for the vibration of stamping equipment and has been widely recognized, making it your best choice
Air cushion shock absorbers are mainly used for vibration reduction and isolation of various equipment such as punching machines, reciprocating air compressors, die-cutting machines, hydraulic cutting machines, shearing machines, washing machines, and coordinate detectors.
Characteristics of air cushion shock absorbers:
1. The pneumatic anti vibration device, combined with the oil pressure damping cylinder design, can effectively avoid resonance phenomena and reduce equipment amplitude.
2. Suitable for eliminating impact vibration.
3. Low Natural frequency design, good anti vibration effect.
4. Using Neoprene Rubber material and oil resistant cap design, it has oil resistance and can prevent general oil pollution corrosion, good weather resistance, and long service life.
5. Natural frequency 3Hz~5Hz, damping coefficient 0.12~0.13
6. Comply with JISD-4101 air cushion pressure test standard.